Hot Water Repairs, Replacements Or Upgrades in Mount Roskill, Auckland
Hot water cylinder repairs, replacements, and upgrades — electric, gas, and continuous flow (Infinity) systems across Auckland.
Hot water cylinder repairs and replacements in Mount Roskill typically cost NZD $300–$3,500 depending on whether you need a repair, a like-for-like cylinder swap, or an upgrade to mains pressure or continuous flow. Muir Plumbing, Gas & Drainage handles all hot water work — electric cylinders, gas systems, and Rheem Infinity continuous flow units — across Mount Roskill, Blockhouse Bay, Epsom, and surrounding Auckland suburbs. We're certified plumbers and gasfitters, so gas hot water and electric systems are both in scope. Signs you need attention: no hot water, lukewarm only, pressure drops mid-shower, or a leaking cylinder. We aim for same-week attendance for non-emergency jobs, with priority for total failures.
| System type | Capacity | Energy source | Typical install cost (NZD) | Lifespan |
|---|---|---|---|---|
| Low-pressure cylinder | 135–180L | Electric | $900–$1,500 | 15–20 yrs |
| Mains pressure cylinder | 180–300L | Electric | $1,500–$2,800 | 15–20 yrs |
| Gas storage | 135–170L | Natural gas / LPG | $1,800–$3,000 | 10–15 yrs |
| Continuous flow (Infinity) | Unlimited | Gas or electric | $1,500–$3,500 | 15–20 yrs |
| Cylinder repair (element/stat) | — | Electric | $300–$600 | Extends life |
| Anode replacement | — | Electric | $200–$400 | Extends life 5+ yrs |
How long does a hot water cylinder replacement take?
- Most like-for-like cylinder swaps take 3–5 hours on site
- We drain the old cylinder, disconnect the inlet/outlet and pressure relief, position the new unit and reconnect
- You'll typically have hot water by end of day
- Upgrades to mains pressure or continuous flow may take longer if pipework changes are needed
For related work, see our Gasfitting services.
What's the difference between gas and electric hot water?
- Electric cylinders heat and store water — cheaper upfront, higher running cost
- Gas continuous flow (Infinity) heats water on demand — higher upfront, lower running cost per litre
- Gas requires a licensed gasfitter for installation — we hold that licence
- LPG is an option if you don't have reticulated gas to the property
For related work, see our Gasfitting services.
How do I know my hot water cylinder needs replacing?
- Age over 15 years — efficiency drops significantly and failure risk rises
- Visible rust or corrosion on the cylinder body
- Water pooling around the base (pressure relief valve releasing, or tank leaking)
- Consistently lukewarm water despite correct thermostat setting
- Repeated element or thermostat failures within a short period
For related work, see our Plumbing maintenance services.
Can you repair my existing system or do I need to replace it?
- We always assess repair vs replace before recommending
- Cylinders under 10 years old with a single element or stat failure are usually worth repairing
- Cylinders over 15 years with multiple issues or a leaking tank are generally better replaced
- We provide a clear recommendation and quote both options where relevant
For related work, see our Leak detection services.
Common questions
Hot Water Repairs, Replacements Or Upgrades — FAQ
Hot Water Repairs, Replacements Or Upgrades across Auckland
We provide hot water repairs, replacements or upgrades services across Auckland. Click your suburb to find out more.
Last updated: 5 June 2026