Plumbing Maintenance in Mount Roskill, Auckland
General plumbing repairs and maintenance across Auckland — leaky taps, running toilets, burst pipes, and water pressure issues fixed fast.
Plumbing maintenance in Mount Roskill covers everything from leaking taps and running toilets to burst pipes and low water pressure. Muir Plumbing, Gas & Drainage has been handling residential and light-commercial plumbing repairs across Mount Roskill, Blockhouse Bay, Epsom, and surrounding Auckland suburbs for over 47 years. We're certified plumbers and our team turns up on time, diagnoses the problem correctly, and gets it fixed properly. Our minimum labour charge is $95 + GST (1-hour minimum) plus a $40 + GST van/call-out fee — $155.25 incl. GST with no materials. All times listed are approximate and include travel time. Same-week bookings available Monday to Friday, 7:30am–5pm.
| Job type | What's involved | Typical cost excl. GST (NZD) | Approx time |
|---|---|---|---|
| Leaking tap repair | Replace washer, or cartridge | $150–$250 | 60 min |
| Running toilet fix | Replace inlet valve or Outlet washer | $200–$280 | 60 min |
| Low water pressure | Diagnose cause, adjust or replace PRV | $200–$500 | 1–2 hrs |
| Burst pipe repair | Locate, cut out, replace section | $350–$900 | 1–3 hrs |
| Tap replacement (install only) | Remove old, install new mixer | $250–$450 | 1 hr |
| Pipe noise investigation | Diagnose water hammer, cause, change pressure valve | $300–$550 | 1–3 hrs |
How much does a plumber cost for small repairs in Auckland?
- Most small repairs (tap washers, toilet valves, minor leaks) cost NZD $150–$350 including labour
- Call-out fees vary — we don't charge surprise extras after quoting
- Bigger jobs like burst pipes or pressure issues typically run $400–$900
For related work, see our Leak detection services.
Can you fix a leaking tap without replacing the whole fixture?
- Yes — in most cases we can repair the existing tap by replacing the washer, seat, or O-ring
- We carry common spare parts on the van so many repairs are done on the first visit
- If the tap body is corroded or cracked, we'll advise on replacement options
For related work, see our Kitchen plumbing services.
What should I do if I have low water pressure at home?
- Check if it's one tap or the whole house — one tap suggests a local blockage or washer issue
- Whole-house low pressure often points to a failed pressure reducing valve (PRV) or mains issue
- PRV or PLV valves replacement typically costs $400–$600 and takes 1–2 hours
For related work, see our Leak detection services.
Do you handle burst pipes and emergency plumbing?
- Yes — burst pipes need fast action to prevent water damage
- Turn off your mains water at the toby (street valve) while waiting
- We prioritise same-day or next-morning attendance for burst pipes
For related work, see our Drainage services.
Common questions
Plumbing Maintenance — FAQ
Useful links
Plumbing Maintenance across Auckland
We provide plumbing maintenance services across Auckland. Click your suburb to find out more.
Last updated: 7 June 2026